Home » Nano Coatings »
We categorized this branch of our coatings based on specific surfaces. We have a wide range of coatings with different characteristics, benefits and specifications which can be applied on all thermosets, thermoplastics, painted surfaces, metals, alloys and plastic surfaces, either painted or unpainted.
Whether the nano coating is for the molds of the production facility, on the components of a machine or the final product quality, and durability of the coating should be the priority.
Below is detailed information and specifications of various Nasiol nano coatings in this category.
Nasiol products do not contain PFOS/PFOA. They are eco-friendly, non-toxic, safe and EU REACH compliant.
Application Areas
Plastics manufacturers, general production companies, land, sea and air vehicle manufacturers, metal fabrication metal cleaning cleaning and maintenance companies, machine manufacturers, construction companies.
Clean is a universal cleaner for hard surfaces. It is used for removing any dust, dirt and residual contamination from the surface, especially prior to the use of nano coating products.
Do not use the product on absorbent and/or highly sensitive materials.
Body of car, boat, plane and other vehicles, glass, plastic, ceramic, painted metal and inox surfaces
Only work on cool surfaces. If required, pre-clean the surface properly, to get rid of heavy dirt and contamination. Clean the surface by applying Nasiol Clean to remove any dust, dirt and residual contamination.
Packaging
150/500 mL
Application Temperature
5°C-30°C
Appearance
Colorless Liquid
Density @23°C
0.79 g/cm3
pH Value
5-5.5
To achieve a high product effectiveness, keep the unopened packaging in a dry, well ventilated space
1/11 V.000 I TECHNICAL DATA SHEET I NASIOL
away from heat and ignition sources, stored at -3 C to + 30 C / 26.60 F to 86 F. The shelf life of product is 24 months from the date of production when stored in the unopened packaging under suggested storage conditions. After every use, it is recommended to close the lid in order to avoid product loss by evaporation.
The technical information described in this document is based on tests and other practical experience that Nasiol believes are reliable. Nasiol cannot guarantee anything but ready to use quality of the product at the time of shipment, disclaims any liability for product performance and incidental or consequential damages, according to self-implementation within the user’s knowledge, beyond the manufacturer’s control. Please refer to the Safety Data Sheet (SDS) before use of product. Users should consult Nasiol for guidance on the suitability of specific applications. Nasiol reserves the right to change the given data without further notice.
Nasiol Omniphob M59 is a state-of-the-art nano layer formulation that has been developed for hard, smooth surfaces and ensures protection against environmental conditions whilst giving hydrophobic and oleophobic effect in a single layer of coating to applied surfaces listed below:
| Packaging | 30 L |
| Appearance | Colorless Liquid |
| Chemical Resistance | 12>pH>1 |
| Salt Water Resistance | ✓ |
| Moisture Resistance | ✓ |
| Pencil Hardness (ISO-15184:2012) | 10H |
| Dry Film Thickness | 0.8-1.1 µm |
| Consumption per Unit Area | 4-5 mL/m2 |
| Density @23°C | 0.87 g/cm3 |
| pH Value | 5.5-6 |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Temperature Durability | 150°C |
| Water Contact Angle | 107° @10 µL |
| Water Contact Angle After “10000“ Wet Scrub (ISO-11998:2006) |
101° @10 µL |
| Water Sliding Angle | 17° @20 µL |
| Oil Contact Angle | 87° @10 µL |
| Gloss Rate @60° (ISO-2813:2014) | 96 (Acrylic) |
Nasiol Omniphob M39 is the ultimate nano protection product which brings hydrophobic and oleophobic effects in a single layer of coating to applied surfaces listed below:
| Packaging | 1-5-30 L |
| Appearance | Colorless Liquid |
| Chemical Resistance | 12>pH>1 |
| Salt Water Resistance | ✓ |
| Moisture Resistance | ✓ |
| Pencil Hardness (ISO-15184:2012) | 10H |
| Dry Film Thickness | 700-800 nm |
| Consumption per Unit Area | 4-5 mL/m2 |
| Density @23°C | 0.86 g/cm3 |
| pH Value | 5-5.5 |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Temperature Durability | 150°C |
| Water Contact Angle | 105° @10 µL |
| Water Contact Angle After “3000“ Wet Scrub (ISO-11998:2006) | 100° @10 µL |
| Water Sliding Angle | 10° @20 µL |
| Oil Contact Angle | 84° @10 µL |
| Gloss Rate @60° (ISO-2813:2014) | 96 (Acrylic) |
Nasiol FCC is flexible film coating for PPF, providing high water repellency and easy-to-clean properties without affecting the characteristics of the underlying protective film, such as self-healing or matt finish and extends the lifetime of PPF. Suitable materials are listed below:
| Packaging | 1-5-30 L |
| Appearance | Colorless Liquid |
| Chemical Resistance | 12>pH>1 |
| Salt Water Resistance | ✓ |
| Moisture Resistance | ✓ |
| Consumption per Unit Area | 2-3 mL/m2 |
| Density @23°C | 0.802 g/cm3 |
| pH Value | 7.2-7.7 |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Water Contact Angle | 102° @10 µL |
| Water Contact Angle After “5000“ Wet Scrub (ISO-11998:2006) | 95° @10 µL |
| Water Sliding Angle | 12°-18° @20 µL |
Nasiol Omniphob M17 is an economic nano protection product which is preferred in various sectors and provides hydrophobic and oleophobic effects to the applied surfaces listed below:
| Packaging | 1-5-30 L |
| Appearance | Colorless Liquid |
| Chemical Resistance | 12>pH>1 |
| Salt Water Resistance | ✓ |
| Moisture Resistance | ✓ |
| Pencil Hardness (ISO-15184:2012) | 7H |
| Dry Film Thickness | 200-300 nm |
| Consumption per Unit Area | 5-8 mL/m2 |
| Density @23°C | 0.8 g/cm3 |
| pH Value | 4.8-5 |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Temperature Durability | 275°C |
| Water Contact Angle | 97° @10 µL |
| Water Contact Angle After “2000” Wet Scrub (ISO-11998:2006) | 92° @10 µL |
| Water Sliding Angle | 25° @20 µL |
| Oil Contact Angle | 76° @10 µL |
| Gloss Rate @60° (ISO-2813:2014) | 93 (Acrylic) |
MP55 is a one-component rust and corrosion resistant nano-coating product that protects the applied surfaces against harmful environmental conditions. Suitable materials are listed below:
| Packaging | 1-5-30 L |
| Appearance | Yellowish Liquid |
| Chemical Resistance | 12>pH>1 |
| Salt Water Resistance | ✓ |
| Moisture Resistance | ✓ |
| Dry Film Thickness | 600-800 nm |
| Consumption per Unit Area | 5-8 mL/m2 |
| Density @23°C | 0.816 g/cm3 |
| pH Value | 5.5-6 |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Temperature Durability | 275°C |
| Water Contact Angle | 106° @10 µL |
| Water Sliding Angle | 12° @20 µL |
| Oil Contact Angle | 89° @10 µL |
Nasiol P45 is a coating material that renews the appearance and restores the color of the interior and exterior plastic surfaces on which it is applied. It preserves the new appearance for up to 2 years. Thanks to its water repellency, it also helps to keep the surface clean.
| Packaging | 1-5-30 L |
| Appearance | Colorless Liquid |
| Chemical Resistance | 12>pH>1 |
| Salt Water Resistance | ✓ |
| Moisture Resistance | ✓ |
| Dry Film Thickness | 700-1000 nm |
| Consumption per Unit Area (Manual Application) | 5-8 mL/m2 |
| Density @23°C | 0.86g/cm3 |
| pH Value | 7 |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Temperature Durability | – |
| Water Contact Angle | 115° @10 µL |
| Water Sliding Angle | 20° @20 µL |
| Oil Contact Angle | 34° @10 µL |
| Gloss Rate @60° (ISO-2813:2014) | 80 |
We offer twenty years of stone care and maintenance experience to provide expert advice and solutions.
House of Stone
28 Mountjoy Street
Phibsborough,
D07RY60
01-8820002
houseofstoneireland@gmail.com
Monday to Saturday
9 a.m to 5 p.m.
Submit you inquiry below and we will get back to you.
ⓒ 2025 House of Stone Ltd. All rights reserved
Call Now
