Water Repellent Nano Coatings for Glass & Ceramic Surfaces
Home » Nano Coatings »
Water Repellent Nano Coatings For Glass & Ceramic Surfaces
Nano coatings applied on glass and ceramic surfaces reduce damage resulting from pollution, icing, and provides acid rain repellent features.
Nasiol products under this category can be applied on a variety of surfaces such as building glass facades, vehicle windows, bath sink, tiles, shower cabins, hotel rooms, green houses, and all glass and ceramic surfaces
Nasiol products do not contain PFOS/PFOA. They are eco-friendly, non-toxic, safe and are EU REACH compliant products.
Applicable Sectors
Building material manufacturers, glass and ceramic manufacturers, restoration companies, furniture manufacturers, cleaning and maintenance companies, solar panel manufacturers, shower cabin manufacturers, air, sea and land vehicle manufacturers etc.
In the home all glass and ceramic surfaces benefit from the application of Nasiol nano coating by reducing maintenance and cleaning costs
Nasiol C Series Nano Coating for Glass and Ceramic Surfaces
Nasiol C Series Nano Coatings form a long-lasting, invisible, easy to clean and protective nano texture on glass shower cabins.
Nasiol C series nano coated surfaces make it difficult for the lime to adhere to the glass surfaces where it is applied. Stains formed over time can be easily cleaned with less detergents and less water.
- Less and faster cleaning: Limescale no longer bonds with the surface.
- Clean without any cleaning agent and less water. Save your cleaning costs.
Before applying a nano coating to any surface
the surface should be clean and dry
Product Information
Clean is a universal cleaner for hard surfaces. It is used for removing any dust, dirt and residual contamination from the surface, especially prior to the use of nano coating products.
Do not use the product on absorbent and/or highly sensitive materials.
Application Surfaces
Body of car, boat, plane and other vehicles, glass, plastic, ceramic, painted metal and inox surfaces
Instructions
- Spray the product onto the surface and wipe with a clean microfiber cloth.
Application Tips
Only work on cool surfaces. If required, pre-clean the surface properly, to get rid of heavy dirt and contamination. Clean the surface by applying Nasiol Clean to remove any dust, dirt and residual contamination.
Benefits & Key Features
- Easy one-step application.
- Removes dust, dirt and polish residue.
Specifications
Packaging
150/500 mL
Application Temperature
5°C-30°C
Appearance
Colorless Liquid
Density @23°C
0.79 g/cm3
pH Value
5-5.5
Storage
To achieve a high product effectiveness, keep the unopened packaging in a dry, well ventilated space
1/11 V.000 I TECHNICAL DATA SHEET I NASIOL
Technical Data Sheet
Clean
away from heat and ignition sources, stored at -3 C to + 30 C / 26.60 F to 86 F. The shelf life of product is 24 months from the date of production when stored in the unopened packaging under suggested storage conditions. After every use, it is recommended to close the lid in order to avoid product loss by evaporation.
Disclaimer
The technical information described in this document is based on tests and other practical experience that Nasiol believes are reliable. Nasiol cannot guarantee anything but ready to use quality of the product at the time of shipment, disclaims any liability for product performance and incidental or consequential damages, according to self-implementation within the user’s knowledge, beyond the manufacturer’s control. Please refer to the Safety Data Sheet (SDS) before use of product. Users should consult Nasiol for guidance on the suitability of specific applications. Nasiol reserves the right to change the given data without further notice.
Nasiol C
Nasiol C is a hydrophobic and oleophobic transparent coating that is specially developed for glass and ceramic surfaces. It also provides, easy-to-clean and stain-free effects to the applied surfaces listed below:
Glass & Ceramics
- Exterior Glass of Vehicles & Buildings
- Glazing (Glass & Ceramic)
- Indoor Household Glass
Benefits & Key Features
Specifications
| Packaging* | 1-5-30 L |
| Appearance | Colorless Liquid |
| Chemical Resistance | 13>pH>1 |
| Salt Water Resistance | ✓ |
| Moisture Resistance | ✓ |
| Dry Film Thickness | 75-100 nm |
| Consumption per Unit Area | 5 mL/m2 |
| Density @23°C | 0.81 g/cm3 |
| pH Value | 2 |
| Transparency | 99% |
| Light Refractive Index | 1.625 (Glass) |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Temperature Durability | 275°C |
| Water Contact Angle | 106° @10 µL |
| Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) | 100° @10 µL |
| Water Sliding Angle | 15° @20 µL |
| Oil Contact Angle | 84° @10 µL |
*: The product is also available at a concentrate form.
Nasiol C1
Nasiol C1 is an economic formula of hydrophobic and oleophobic transparent coating that is specially developed for glass and ceramic surfaces. It also provides, easy-to-clean and stain-free effects to the applied surfaces listed below:
Glass & Ceramics
- Exterior Glass of Vehicles & Buildings
- Glazing (Glass & Ceramic)
- Indoor Household Glass
Benefits & Key Features
Specifications
| Packaging | 1-5-30 L |
| Appearance | Colorless Liquid |
| Chemical Resistance | 12>pH>1 |
| Salt Water Resistance | ✓ |
| Moisture Resistance | ✓ |
| Dry Film Thickness | 75-100 nm |
| Consumption per Unit Area | 5 mL/m2 |
| Density @23°C | 0.80 g/cm3 |
| pH Value | 2 |
| Transparency | 99% |
| Light Refractive Index | 1.625 (Glass) |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Temperature Durability | 275°C |
| Water Contact Angle | 102° @10 µL |
| Water Contact Angle After “2000” Wet Scrub (ISO-11998:2006) | 96° @10 µL |
| Water Sliding Angle | 28° @20 µL |
| Oil Contact Angle | 72° @10 µL |
*: The product is also available at a concentrate form.
